Why Choose GEEETECH UV Curing Lightbox?

• Fast and uniform curing in a few minutes

• Close the door to prevent UV leakage and protect our eyes

• Curing anytime and anywhere

1. Size: Medium（GCB-1)

Power Input: DC 12V

Power Adapter: Input: AC 100-240V，50~60Hz, Output:12V

UV Lamp Wavelength: 405nm

Rotating Speed: 7r/min

Product Size: 217(L)×204(W)×228(H)mm

Curing Size: Φ185mm×180mm

Washing/Curing Time :0~60min

2. Size:  Large（GCB-2)

Power Input: DC 12V

Power Adapter: Input: 100-240V AC, 50/60Hz, Output:12V

UV Lamp Wavelength: 405nm

Rotating Speed: 4r/min

Product Size: 298(L)×264(W)×338(H)mm

Curing Size: Φ250mm*250mm

Washing/Curing Time :0~60min

GEEETECH GCB-1

• 💪【Fast Assembling & Easy to use】Using Exquisite Whiteware Acrylic Board as its main assembling pieces,It can be assembled quickly. It has been proven that it gives off a lower leakage of UV when it’s at work. Curing Size: Φ185mm×180mm.

• 💪【405nm UV cure Lamp & Versatile Compatibility】Equipped with a cure light strip( including 6 pcs UV cure lamp beads), the curing box will operate a far more effective curing process with its luminous power of 220W/m². It is compatible with most standard 405nm resin, suitable for most LCD, DLP, or SLA 3D Printed objects.

• 💪【Evenly Curing With 360°Rotating Tray】7 rounds per minute its tray performs, this curing box leaves no dead angle, which offers the processed models a far smoother and evener appearance.

• 💪【Smart Time Control】Wide range of time setting :1~60min. Cure simply takes times and depends on what type of resin you are using. This cure alow for finely tuned curing times, it’s useful for large resin prints.

• ❤️【Intelligent Protection】Closed curing design reduce UV leakage. The machine will stop working automatically when the box is open, and work again when the curing box close, ensure excellent curing effect.

GCB-1 is a machine developed for the secondary curing process of models printed according to SLA. Models found in this process will fully maintain an optimal look and function.

Q: Where is the LED strip?

A: Look around the turntable, the light bar may be stuck at the bottom of the turntable due to transportation collision.

Q: Doesn’t work even if you close the door?

A: There is a small switch on the side of the door that needs to be installed correctly.

GEEETECH GCB-2